Earthen Dams

Home \ concrete repair \ Earthen Dams
2 October 2019 - 10:06, by , in concrete repair, No comments

 

1. Locate leak after a rain storm by walking around the waters edge. Stirring up mud and silt as you go. You will notice this will get drawn into the hole when you get near it. Pond will obviously stop leaking after water level drops below the hole.

2. Mix 4 parts to 1 part water in a bucket – stir well.

3. Pour ir / Water mixture over the leaking area, allowing the water to draw into the paths the water is leaking through.

4. The amount necessary depends, of course, on the volume that must be filled.

 

About author:

Leave a Reply